This gloss meter is suitable for quality management for paper, metal plate, plastics, vinyl and glass which have gloss. The light source is white LED, which is long lived and makes it possible to measure the sample simultaneously at the five angles 20º, 45º, 60º, 75º and 85º.
The measurement angles can be seen at a glance, thanks to the
LED lamp at the full-height panel in the body.
The foot switch is the standard equipment.
In accordance with ISO 8254-1 and JIS P 8142, "Paper and Board Measurement of specular gloss" Part 1 : 75 degree gloss with a converging beam, TAPPI method.
In accordance with ISO 8254-3, "Paper and Board Measurement of specular gloss" Part 3 : 20 degree gloss with a converging beam, TAPPI method.
In accordance with JIS Z 8741, 20 degree gloss with a parallel beam.
Dimensions
W 483mm x D 157mm x H 240mm
Weight
Approx. 13kg
Power supply
100V to 240V AC, 50 / 60Hz
Power consumption
20W
Light source
White LED
Light receiving element
Fast-reponse silicon photosel
Measuring angle
20º - 20º : JIS Z 8741 or ISO 8254-3
45º - 45º : JIS Z 8741
60º - 60º : JIS Z 8741
75º - 75º : JIS Z 8741 or ISO 8254-1 , JIS P 8142
85º - 85º : JIS Z 8741
Measuring range
20º : Gloss degree 0.1 to 2038
45º : Gloss degree 0.1 to 1675
60º : Gloss degree 0.1 to 1000
75º : Gloss degree 0.1 to 378
85º : Gloss degree 0.1 to 162
• Gloss degree : within 0.1%
where 30 minutes later after turning on the power, 20 times of measurements are made at 10 seconds interval at 23ºC in airspace against a standard white plate and repeatability is checked. • Gloss degree : within 1%
where 30 minutes later after turning on the power, 10 hours of measurements are made at 1 minute interval at 23ºC in airspace against a standard white plate and repeatability is checked.
Display device
PC or Control unit (CU - 1)
Interface
Connection via RS-232C
Use Environment
10ºC to 40ºC, 30 to 80% R.H.
No dew Condensation
You can download PDF catalogues from the next page.
Feel free to print them out.
