This is a highly sensitive laser particle counter (turbidimeter) for clean water, most suitable as the counter measurement against the provisional guide line for clean water by Ministry of Health, Labor and Welfare. It has a strong effect on particle counting of cryptosporidium, etc., jeopardizing safety of tap water.
Turbidimeter used exclusively for low turbidity measurement based on the particle counting method.
Both particle counts and turbidity can be measured simultaneously.
Cryptsporidium and giardia are sorted to be the same particle size, so variation in particle size can be judged easily at a glance.
This model can be connected directly to your line of measurement.
You can set an alarm for arbitrary particle counts of turbidity value.
A long life semi-conductor laser is used as a light source.
Contamination detector is equipped with this model.
Data analysis and filing software is available as a standard configuration.
A pump is built in for sample suction and measurement.
Dimensions
W 175mm x D 260mm x H 240mm
Weight
Approx. 6.5kg
Power supply
100V AC, 50 / 60Hz
Power consumption
100VA
Light source
Semi-conductor laser
Measuring items
Particle counts , turbidity
Measuring range
• Particle counts : 0 to 106 / 50ml • Turbidity : 0.0000º to 2.0º (NTU unit)
Measuring method
Lateral scattering method
Flow volume for measurement
50 ml / min.
Measuring time
Elapsed time for particle data integration
6 sec. to 9 min. 59sec. to be arbitrarily set
(possible without interval)
Measuring particle size
6 channels for 0.5µm to 1µm, 1µm to 3µm,
3µm to 7µm, 7µm to 12µm, 12µm to 15µm, 15µm or more
*Turbidity is to be calibrated using polystylene standard liquid prior to shipment from our factory.
You can download PDF catalogues from the next page.
Feel free to print them out.
