This is an optional accessory to be used with WA 6000 or WA 2000N, which enables your measurements automatized and laborsaving. You just set sample beakers and press a start switch, and all the operation from sampling to flow cell cleaning is automatically done. Measurement of pH is also available in option in addition to the measurements of turbidity and coloration.
Amount of sample and cleaning water will be minimized.
Calibration by standard points and cleaning frequency can be arbitrarily set.
Total process from sampling and measurements to cleaning is progressed in a short time.
Maximum 50 samples can be set on a turn-table.
When using an optional data filing software, connection with your PC is available for your data processing.
Dimensions
W 722mm x D 640mm x H 695mm
(or W 850mm x D 640mm x H 695mm, with pH unit)
Weight
Approx. 40kg
(or Approx. 47kg, with pH unit)
Power supply
100V to 240V AC, 50 / 60Hz
Power consumption
100VA
Number of samples
Maximum 50 samples
Sample beaker
100ml tall beaker
(or 200ml tall beaker, with pH unit)
Sample stirring
Impeller
Cleaning
• Impeller : Cleaning by shower • Sampler's flow path : Feeding and drain distilled water by a sampling pump
Sampling
Suction by a sumpling pump
Sampling time
Minimum 10 sec. to 20 sec.
Cleaning time
Minimum 20 sec. to the time tube arbitrarily set
Measuring time
Approx. 90 sec. / sample
(or approx. 5 min.(default), with pH unit : minimum 3 min. 30 sec. to the time to be arbitarily set)
Measuring stop
By a beaker sensor or processing a stop key
Pump
Paimol pump • Flow volume : 660ml / min. • Exhalation value : 35kPa
Valve
Solenoid valve, SUS-made
Option
• Data filing software • Dust cover • pH measuring unit
You can download PDF catalogues from the next page.
Feel free to print them out.
